What are the production defects of traditional addition-type liquid rubber and compound rubber?
▶ Traditional addition-type liquid rubber and addition-type compound rubber are generally AB two-component, in which the A component generally contains base rubber and platinum catalyst, and the B component contains base rubber, hydrogen silicone oil crosslinking agent and inhibitor and other additives. During use, it is necessary to accurately measure according to the ratio (mostly 1:1, but also 10:1 or other ratios), and the AB components must be evenly mixed in static mixers, blenders, open mills and other mixing equipment before use. This not only increases the equipment investment cost, but also increases the process cost, labor cost, and storage cost, which brings some inconvenience to the end-user's batch industrial production. And generally, after the AB components are evenly mixed, the room temperature storage time is short. Generally, after being placed for a few hours to a week, the fluidity will gradually be lost, and even the dead rubber will lose its use value.
What are the advantages of one-component addition-type liquid rubber and compound rubber?
▶ For some special purposes (such as CIPG/FIPG, food grade, medical grade, clothing printing, glass fiber coating, etc.), adding liquid glue and compound glue into a single component ready-to-use type can reduce the user's mismatch in the production process, ensure product quality, and improve the production efficiency of end users, prolong the operation time, thereby greatly improving the technical added value of the glue.

What is a one-component platinum vulcanizer? What are its advantages?
▶ The earliest main vulcanization molding method for silicone rubber compound was peroxide vulcanization, such as using di-2-tetra-vulcanizer for extruded silicone and di-2-penta-vulcanizer or odorless vulcanizer for molded silicone. With the continuous improvement of environmental protection requirements and labor costs, environmental protection, high efficiency and automation have become the mainstream of product and technology development.
Compared with the traditional peroxide system, platinum-cured silicone products have the following characteristics: no by-products during the curing process, no odor, high transparency, high yellowing resistance, easier to pass food and medical grade tests, fast curing speed, higher production efficiency, easy to use, some products can be automatically produced and processed by injection machines and other equipment, greatly reducing labor costs. With the continuous improvement of platinum curing technology and the gradual decline in platinum costs, the advantages of platinum curing over peroxide curing are becoming more and more obvious, and platinum curing agents are gradually becoming the mainstream in the market.
Traditional platinum vulcanizers are generally divided into two components, A and B, where A is the platinum component and B is the hydrogen-containing component. During use, customers need to first add component B and mix evenly on the open mill, and then add component A and mix evenly. The first batch of materials needs to be mixed twice, which has high labor intensity and low production efficiency.
Through the adjustment of formula and process, the platinum component and the hydrogen-containing and inhibitor components are organically combined to produce a single-component platinum vulcanizer. Compared with the two-component product, the single-component product has a higher content of effective ingredients, resulting in a small total addition amount, low cost, easy use and high production efficiency. In some products and applications, the comprehensive cost of the single-component platinum vulcanizer is even lower than that of the peroxide vulcanizer.
Therefore, in recent years, single-component platinum vulcanizers have been increasingly used, and the added value of the product is higher than that of traditional peroxide vulcanizers and two-component platinum vulcanizers. However, the disadvantage is that the storage time is still not long enough and the formula is relatively complicated.

How to develop one-component addition-type liquid rubber, compound rubber, and platinum vulcanizer?
▶ The traditional method is to add hydrogen silicone oil, inhibitor and platinum catalyst to the base rubber and mix them, but the disadvantage of this is that the operation time is short and the rubber is prone to dead. The usual technical idea is to increase the dosage of inhibitors, or to use special new inhibitors with long room temperature operation time, but this will bring about the problem of too slow vulcanization speed, so you have to add more platinum catalyst at the same time, but this will bring about the problem of high cost, and the storage time at room temperature is still not satisfactory, and generally needs to be stored in a freezer.
