Jiujiang Deep Sea Technology Development Co., Ltd.

Effect of the structure of hydrogen-containing silicone oil on the properties of silicone rubber

Jun 13, 2025

As the core component of silicone rubber crosslinking agent, the molecular structure (hydrogen content, molecular weight distribution, active hydrogen position, etc.) of hydrogenated silicone oil directly determines the mechanical properties, heat resistance and process characteristics of silicone rubber. The following is an in-depth analysis of the key influencing dimensions:

500cst Water Soluble Silicone Oil

 

 Influence of hydrogen content (Si-H bond density)

 

Hydrogen content range Crosslinking density Silicone rubber performance Typical applications

0.1-0.3% Low crosslinking High elasticity (elongation>800%), low hardness (Shore A 10-30) Medical catheters, flexible touch layers

0.3-0.8% Medium crosslinking Balanced strength and elasticity (tensile strength 5-8MPa) Electronic seals, keyboard keys

0.8-1.5% High crosslinking High hardness (Shore A 70-90), resistance to compression permanent deformation Automotive gaskets, high-voltage insulators

 

 

Mechanism of action:
For every 0.1% increase in hydrogen content, the number of crosslinking points of silicone rubber increases by about 15%, resulting in restricted molecular chain movement, which is manifested in increased hardness and decreased elongation.

 

 

Influence of molecular chain structure


1. End hydrogen vs side chain hydrogen
H-terminated silicone oil:

Forms a linear cross-linked network, giving silicone rubber high resilience (rebound rate > 90%).

Disadvantages: "de-crosslinking" is easy to occur at high temperatures (strength loss of 30% at 250°C).

**Side chain hydrogen silicone oil (Side-H)****:

Build a three-dimensional network to improve heat resistance (strength retention rate > 80% after aging at 300°C for 72h).

Disadvantages: Tear strength is reduced by 15-20% (poor molecular chain orientation).

 

2. Molecular weight distribution
Narrow distribution (PDI < 1.2):

Uniform cross-linking, high transparency (haze < 5%, suitable for optical adhesive).

Broad distribution (PDI > 1.5):

The presence of unreacted low molecular weight components leads to excessive volatile matter (> 0.5%).

 

 

 Steric hindrance effect of active hydrogen

 

Influence of α-substituents:

Methyl protection (-Si-CH₃): slow reaction rate, controllable curing time (for thick products).

Phenyl protection (-Si-Ph): improves radiation resistance (no yellowing after UV irradiation for 500h).

β-branched structure:

Long-chain alkyl (such as -Si-C₈H₁₇) can reduce surface energy and enhance the hydrophobicity of silicone rubber (contact angle > 110°).

 

 

Control of process performance


Curing speed:

For silicone oils with more than 3 Si-H bonds per molecule, the gel time is shortened by 50% (inhibitors are required).

Flowability:

Low-viscosity hydrogenated silicone oil (<100cSt) can improve injection molding filling (95% filling rate for wall thickness of 0.2mm).

Side reaction control:

High hydrogenated silicone oil (>1%H) needs to add acetylene alcohol inhibitors to prevent bubbles (H₂ release <0.1mL/g).

 

 

 Structure-performance optimization case


Goal: Preparation of conductive silicone rubber resistant to 250℃

Selection of hydrogenated silicone oil:

Side chain hydrogenated silicone oil with 0.6% hydrogen content (molecular weight 50,000, PDI=1.1)

Formula design:

Mixed with vinyl silicone oil (Vi%=0.2%)

Add silver-coated copper powder (60wt%)

Performance results:

Volume resistivity: 10⁻³Ω·cm

Heat resistance: Resistance change <10% after 250℃/1000h

 

Conclusion
The molecular structure of hydrogenated silicone oil is a "genetic level" regulatory factor for the performance of silicone rubber:

Low hydrogen content + terminal hydrogen structure → highly elastic medical products

High hydrogen content + side chain hydrogen → high temperature resistant engineering parts

Narrow distribution + phenyl protection → high-end optical applications

goTop