Methyl hydrogen silicone oil
Methyl high hydrogen silicone oil is an industrial "MSG" and is widely used in industry. Methyl high hydrogen silicone oil can cross-link into a film at low temperature under the action of metal salt catalysts, forming a waterproof film on the surface of various materials. It can be used as a waterproofing agent for various materials such as fabrics, glass, ceramics, paper, leather, metal, cement, marble, etc., especially for fabrics. Methyl hydrogen silicone oil emulsion and methyl hydroxy silicone oil emulsion are used together to waterproof and maintain the air permeability of fabrics, and can improve the tear strength, friction strength and anti-fouling properties of fabrics, and improve the feel and sewing properties of fabrics. In addition, it is used as an anti-sticking release agent and cross-linking agent for paper.
![]()
Technical indicators:
1. Appearance: colorless transparent liquid
2. Viscosity (25℃, mm²/S): 25cst
3. Specific gravity (25℃): 1.00
4. Refractive index (N): 1.396
5. Hydrogen content (%) ≥: 1.6
6. Silicone content: 100%
Performance and use:
Under the action of catalyst, it can cross-link at appropriate temperature to form a waterproof film on the surface of various substrates. It is widely used as a waterproof agent, anti-adhesive agent or anti-corrosion agent for fabrics, fire extinguishing agents (dry powder), paper, metal, leather, wood, glass, cement, ceramics, marble, etc.
Packaging and storage:
200kg plastic-coated iron drum packaging (200kg/barrel), be careful to avoid contact with acids, alkalis or heavy metals, otherwise the methyl hydrogenated silicone polymer will decompose rapidly and release hydrogen with explosion hazards in the air. Pay attention to moisture-proof and store in a cool and dry place. The storage period is more than one year. If it exceeds the period, it can be re-inspected according to the standard and can still be used if it passes.
Matters needing attention in the production process of hydrogen-containing silicone oil:
The raw materials used in the production of methyl high hydrogen-containing silicone oil are toluene, monomethyldichlorosilane, dimethyldichlorosilane, trimethylmonochlorosilane and concentrated sulfuric acid. Toluene, monomethyldichlorosilane, dimethyldichlorosilane and trimethylmonochlorosilane have low flash points, are A flammable liquids, and are A combustible liquids. Concentrated sulfuric acid is highly corrosive. It is a hazardous chemical construction production unit. The leakage of raw materials during production, storage and transportation seriously affects production safety and pollutes the environment. Therefore, production, transportation and storage must have a strict safety production management system.
Safety production measures and prevention and control measures for methyl high hydrogen-containing silicone oil
Safety production is related to the safety of people's lives and property, to social reform, development and stability, and to the survival and growth of enterprises. Safety is the best brand of an enterprise, safety is the greatest benefit of an enterprise, and doing a good job in enterprise safety production and fulfilling the main responsibility of enterprise safety production is the key to ensuring safety.
Adhere to the principle of "safety first, prevention first, and comprehensive management", adhere to the people-oriented and harmonious society-building safety development concept, and effectively fulfill the main responsibility for safe production.
1. Adhere to the "Eight Provisions of the Ministry of Chemical Industry on Strengthening Safety Production in Chemical Enterprises"² to organize production.
2. Establish various rules and regulations for safety and fire management so that everyone has rules to follow and establish a complete safety management file.
3. Check lightning protection, anti-static facilities and all equipment. The grounding wire of the pipe rack must be installed and tested. Explosion-proof electrical equipment and lighting fixtures must meet explosion-proof standards; telephones and other safety communication systems must be unobstructed and easy to use.
4. Safety protection facilities, ladders, guardrails, and safety covers must be sturdy and complete. The trenches and manholes must have complete covers, and the floor slabs must have covers, and the ground must be flat and unobstructed. The tank area must be cleaned up, and no debris is allowed to be piled up. Hazardous chemicals such as monomers used in production must be piled up in designated locations.
5. Propose a safety training plan (including training content, assessment methods and requirements), organize and implement employee safety education, establish and improve mass safety, firefighting and rescue organizations, and after training, be able to master firefighting and rescue skills, have clear division of responsibilities, and be on duty at ordinary times and be able to use them in emergencies, so as to remain calm in times of crisis. Production commanders and operators are allowed to take up their posts only after passing technical and safety assessments.
6. Equipment signs and pipeline flow signs are complete, and signs for factory fire hydrants, underground cable trenches, traffic bans, safety wells, etc. are complete and eye-catching.
7. According to the process characteristics, propose a procurement plan for flammable gas alarms, safety fire prevention equipment, labor protection and emergency rescue equipment (including anti-gas and anti-corrosion masks, oxygen respirators, first aid kits, etc.).
8. Before trial production, the project should be comprehensively "checked, checked and determined", and all safety issues should be rectified. According to the actual situation of this project and combined with safety design, formulate plans and emergency measures for major safety and quality problems that may occur during the trial operation of the production line.
9. Explosion-prone points:
9.1 The reaction temperature during hydrolysis should not exceed 35°C, otherwise a fire or explosion may occur.
9.2 The heating equipment should be normal, the heat transfer oil circuit should not be blocked, and the heating pipe should not leak oil, otherwise a fire or explosion may occur.
9.3 When the plastic pipe leaks, the liquid should be drained during welding repair, otherwise a fire or explosion may occur.
9.4 Fireworks and smoking are strictly prohibited in workshops, warehouses and storage areas, otherwise a fire or explosion may occur.

