In addition-cure liquid silicone rubber (LSR/RTV-2) formulations, vinyl silicone oil determines the "base character," while hydrogen-containing silicone oil determines the "crosslinking skeleton." Choosing the right hydrogen-containing silicone oil is half the battle won in formulating a successful product.
One. Hydrogen-containing silicone oil: The "architect" of addition-cure silicone.
If we compare the silicone crosslinking network to a building:
• Vinyl silicone oil = steel skeleton (provides the main chain structure)
• Hydrogen-containing silicone oil = concrete joints (provides crosslinking connection points)
• Platinum catalyst = construction instructions (controls the reaction initiation)
The structure type, hydrogen content, and molecular weight of the hydrogen-containing silicone oil directly determine the density, strength, and flexibility of this "building".
Two. Structure and Classification of Hydrogen-Containing Silicone Oils
2.1 Basic Chemical Structure The chemical name of hydrogen-containing silicone oil is polymethylhydrogensiloxane (PMHS), and its basic structural unit is:

Wherein:
• M unit: Trimethylsiloxy (CH₃)₃SiO [1/2] – End-capping group
• Mᴴ unit: Dimethylhydrosiloxy (CH₃)₂HSiO [1/2] – Hydrogen-containing end-capping
• D unit: Dimethylsiloxy (CH₃)₂SiO [2/2] – Main chain repeating unit
• Dᴴ unit: Methylhydrosiloxy (CH₃)HSiO [2/2] – Hydrogen-containing main chain unit
2.2 Three Major Structural Types Based on the distribution of Si-H bonds on the molecular chain, hydrogen-containing silicone oils can be divided into three categories:
end-hydrogen silicone oils The crosslinking reaction of end-hydrogen silicone oils mainly occurs at the ends of the molecular chains, resulting in a longer chain segment in the crosslinked network. Therefore: • Lower crosslinking density • Lower hardness of the vulcanizate • Higher elongation • Generally better transparency (fewer crosslinking points, lower microscopic inhomogeneity)
Side-hydrogen silicone oils have Si-H distributed on the main chain, with each molecule participating in multiple crosslinking points: • High crosslinking density • High hardness of the vulcanizate • Good tensile and tear strength • However, excessive use can easily lead to embrittlement of the compound.
End- and side-hydrogen silicone oils have seen rapid and continuous growth in usage in recent years. By adjusting the hydrogen content ratio of end groups/side groups, the crosslinked network structure can be controlled within a wide range to meet the needs of different application scenarios.
2.3 The essential difference between hydroxyl silicone oil and hydrogen-containing silicone oil. Common misconception among beginners:
confusing hydrogen-containing silicone oil and hydroxyl silicone oil.
• Hydrogen-containing silicone oil (Si-H): Used for addition-type silicone oil, it crosslinks with vinyl groups and does not require water.
• Hydroxyl silicone oil (Si-OH): Used for condensation-type silicone oil, it condenses and dehydrates with crosslinking agents (such as tetraethyl orthosilicate).
The two have completely different chemical properties and should never be mixed.
Three. Hydrogen Content: The "Knob" of Crosslinking Density
3.1 Definition and Measurement of Hydrogen Content Hydrogen content refers to the amount of Si-H bonds in hydrogen-containing silicone oil, and is usually expressed in two units:
Unit: Definition: Typical Range:
wt% Percentage of H mass in the Si-H bond relative to the total mass 0.05%~1.6%
mol% Mole percentage of D^H units relative to all D units 5%~100%
In industry, the hydrogen content is commonly determined by chemical methods (reacting with excess alkali to measure the volume of hydrogen) or infrared spectroscopy (the characteristic absorption peak of Si-H at 2160 cm⁻¹).
3.2 Effect of hydrogen content on crosslinking density
The relationship between crosslink density and hydrogen content and vinyl content can be derived from classical rubber elasticity theory.
Key conclusions:
• When the hydrogen content is below the stoichiometry, the crosslink density increases linearly with increasing hydrogen content.
• When the hydrogen content exceeds the stoichiometry, the crosslink density tends to saturate (limited by vinyl content).
• Excessive hydrogen-containing silicone oil is not only wasteful but also introduces unreacted Si-H residues, leading to decreased heat resistance.
3.3 Effect of Hydrogen Content on Hardness Hardness (Shore A) is directly related to crosslinking density.
Experimental data show that:

Note: Data is based on end-side hydrogen-containing silicone oil (viscosity 200 mPa·s), vinyl silicone oil with 0.5 mol% vinyl content, and platinum catalyst with 10 ppm.
Pattern: Hardness increases approximately linearly as hydrogen content increases from 0.05% to 0.30%; above 0.50%, the increase in hardness slows down, but brittleness increases significantly.
3.4 Effect of Hydrogen Content on Mechanical Properties:
Tensile Strength and Tear Strength
The effect of hydrogen content on tensile strength follows an inverted U-shaped curve:
• Low hydrogen content (<0.10%): Insufficient crosslinking density, large slip space between molecular chains, low tensile strength (<3 MPa)
• Moderate hydrogen content (0.15~0.35%): Moderate crosslinking density, chain segments can withstand stress and have a certain slip space, resulting in the highest tensile strength (5~8 MPa)
• High hydrogen content (>0.50%): Excessive crosslinking, restricted chain segment movement, stress concentration easily leads to fracture, tensile strength decreases.
Tear strength follows a similar pattern, with the optimal hydrogen content range slightly lower than the optimal tensile strength value.
For applications requiring high flexibility (such as mannequins and flexible molds), a low-hydrogen-content formulation is recommended; for structural components, a high-hydrogen-content formulation can be used.
3.5 Effect of Hydrogen Content on Transparency The transparency of addition-cure silicone is limited by two factors:
• Filler dispersion (addition-cure systems typically have no or minimal filler, so this is not the primary factor)
• Microscopic uniformity of the cross-linked network Mechanism of the effect of hydrogen content on transparency:
• Low hydrogen content: Sparse cross-linking points, uneven local cross-linking, potentially leading to microscopic phase separation → Slight haze
• Moderate hydrogen content: Uniform cross-linking, regular network → Optimal transparency (transmittance > 90%)
• High hydrogen content: Excessively rapid cross-linking, forming localized high-density micro-regions → Microscopic stress concentration and refractive index differences → Decreased transparency
For optical grade silicone (LED encapsulation, optical lenses), it is recommended to control the hydrogen content within the range of 0.15~0.25% wt%.
3.6 Effect of Hydrogen Content on Heat Resistance The heat resistance of silicone rubber is mainly affected by the following factors:
• Thermal oxidation stability of the main chain (high Si-O bond energy, good basic heat resistance)
• Thermal stability of crosslinking points
• Thermal oxidation of residual Si-H Effect of hydrogen content on heat resistance:
• Appropriate hydrogen content: forms stable Si-C-C-Si crosslinks, excellent heat resistance (long-term use at 200℃)
• Excessive hydrogen content: residual Si-H is easily oxidized at high temperatures, leading to main chain breakage and crosslinking network degradation, manifested as softening, stickiness, and decreased mechanical properties at high temperatures.
Industrial experience: the hydrogen content should be added at 90~95% of the stoichiometric ratio to ensure sufficient crosslinking while avoiding Si-H residue.
For high-temperature applications (>200℃), it is recommended to use end-hydrogen or low-hydrogen content formulations.
3.7 Effect of Hydrogen Content on Process Performance Pot Life: The hydrogen content itself has little direct impact on the pot life (the pot life is mainly controlled by the amount of platinum catalyst and inhibitors).
However, high hydrogen content formulations often have the following process problems:
• More concentrated exothermic reaction (more Si-H per unit volume participates in the reaction), leading to local temperature rise and indirectly shortening the pot life.
• More sensitive to catalysts; even trace impurities can trigger "explosive polymerization." Curing Speed: At the same catalyst dosage:
• Higher hydrogen content results in faster curing speed (more reaction sites).
• However, the actual curing speed depends more on the Si-H/Si-Vi matching ratio and catalyst concentration.
Demolding Properties: High hydrogen content formulations have high crosslinking density, slightly larger vulcanizate shrinkage, and complex adhesion to molds. The amount of release agent needs to be adjusted according to the specific mold material.
Four. Molecular Weight: A "Regulator" at the Network Scale
4.1 Relationship between Molecular Weight and Viscosity The molecular weight of hydrogen-containing silicone oil is usually not measured directly, but is characterized by kinematic viscosity (mm²/s or mPa·s, 25℃).
Common viscosity ranges for hydrogen-containing silicone oils used in industry:
| Viscosity Grade | Viscosity Range (mPa·s, 25°C) | Approximate Molecular Weight | Typical Applications Spray Coating |
| Low Viscosity | 20-50 | 1,000~2,500 | Thin-Layer Encapsulation General Mold Glue |
| Medium Viscosity | 100-500 | 5,000-15,000 | Electronic Encapsulation Thick-Walled Products |
| High Viscosity | 1,000-10,000 | 30,000-80,000 | High-Strength Structural Components |
4.2 Influence of Molecular Weight on Crosslink Network Structure The molecular weight of hydrogen-containing silicone oil determines the molecular weight between crosslinks (Molecular Weight Between Crosslinks, Mc): Low molecular weight hydrogen-containing silicone oil:
• Short molecular chains, small spacing between crosslinks
• Dense crosslink network but short chain segments
• High hardness and high modulus of vulcanizate
• Low elongation and poor resilience
• Structure similar to "short steel bars + dense nodes" High molecular weight hydrogen-containing silicone oil:
• Long molecular chains, large spacing between crosslinks
• Sparse crosslink network but long chain segments
• Soft vulcanizate with low modulus
• High elongation and good resilience
• Structure similar to "long steel bars + sparse nodes"
4.3 Effect of molecular weight on mechanical properties
Mechanism: In the cross-linked network formed by high molecular weight hydrogen-containing silicone oil, long chain segments can orient and extend under stress, absorbing more energy, thus resulting in higher tensile and tear strength. Low molecular weight hydrogen-containing silicone oil forms a network that is too rigid, leading to stress concentration and premature breakage.
4.4 The Influence of Molecular Weight on Volatile Matter This is an often overlooked but crucial factor:
• Low molecular weight hydrogen-containing silicone oil (<200 mPa·s): Contains more oligomers, resulting in high volatile matter (>1%)
• High molecular weight hydrogen-containing silicone oil (>1000 mPa·s): Low volatile matter (<0.5%) Hazards of excessively high volatile matter:
• Low molecular weight compounds volatilize during vulcanization, forming oil mist or fog-like deposits on the product surface
• In electronic packaging applications, volatiles contaminate components.
• In high-temperature applications, volatiles cause bubbles and voids.
• In optical applications, volatiles condense on the lens surface, affecting light transmittance.
Selection Principles:
• Electronic/Optical Grade Applications: Select high viscosity (>1000 mPa·s) or low volatility refined hydrogen-containing silicone oil.
• General Industrial Applications: Medium viscosity (100~500 mPa·s) is sufficient.
• Industrial molds requiring rapid demolding: Low viscosity is acceptable, but ensure adequate vulcanization.
4.5 Influence of molecular weight on mixing process
Hydrogen-containing silicone oil needs to be uniformly mixed with vinyl silicone oil, fillers, and additives:
• Low viscosity hydrogen-containing silicone oil: easy to disperse and low mixing energy consumption, but it tends to "crawl" on the filler surface, resulting in uneven distribution.
• High viscosity hydrogen-containing silicone oil: difficult to mix, requiring longer mixing time or higher shear force, but once uniformly dispersed, it has better storage stability.
In actual formulations, a strategy of combining high and low viscosity is often adopted to balance processability and performance.
Five. Selection Principles of Hydrogen-Containing Silicone Oil: From Theory to Practice
Hydrogen-Containing Silicone Oil Selection Decision
Matching the Appropriate Hydrogen-Containing Silicone Oil Type Based on Application Scenarios
Application Scenarios:
Electronics/Electrical: Low volatility, high purity, hydrogen content 0.5-1.0%
Molding/Industrial: Medium viscosity, balanced performance, hydrogen content 0.3-0.8%
Medical/Food: High safety, low residue, chlorine content 0.2-0.5%
Verifying Crosslinking Density and Vulcanization Conditions
5.1 Selection of Decision Matrix
| Application Scenarios | Recommended Structure Types | Hydrogen Content (wt%) | Recommended Viscosity (mPa·s) | Key Considerations |
| Precision Mold Glue | End-side Hydrogen Containment | 0.15-0.30 | 200-500 | Moderate hardness, high elongation, easy demolding |
| Electronic Potting Compound | Side-side Hydrogen Containment or End-side Hydrogen Containment | 0.20-0.40 | 500-2000 | Low volatility, high thermal conductivity, insulation |
| LED Optical Packaging | End -Hydrogen Containment | 0.10-0.20 | 1000-5000 | High transparency, low volatility, high temperature resistance |
| Coating/Spraying | End-side Hydrogen Containment or End-side Hydrogen Containment | 0.05-0.15 | 20-100 | Low viscosity, sprayable, flexible |
| Adhesives/Sealants | End-side Hydrogen Containment | 0.20-0.50 | 100-500 | Moderate hardness, strong adhesion |
| Human Models/Prosthetics | End- Hydrogen Containment | 0.05~0.12 | 500-2000 | Ultra-soft, high elongation, low hardness |
| High-Temperature Curing Parts (>200°C) | End- Hydrogen Containment | 0.10-0.20 | 1000+ | Low Si-H residue, heat aging resistance |
| Rapid Demolding Production Line | Side -Hydrogen Containment | 0.30-0.60 | 100-300 | Fast curing, high hardness |
5.2 Matching Principles with Vinyl Silicone Oils
he selection of hydrogen-containing silicone oils must be considered in pairs with vinyl silicone oils.
Stoichiometric ratio: Ideal reaction molar ratio: Moles of Si-H / Moles of Si-Vi = 1.0 Empirical ratio in industrial practice: R = Moles of Si-H / Moles of Si-Vi • R < 1.0: Excess vinyl, insufficient Si-H, incomplete crosslinking, sticky vulcanizate surface • R = 1.0~2.0: Ideal range, sufficient crosslinking, balanced performance • R > 2.0: Excess Si-H, high residual Si-H, decreased heat resistance, poor long-term reliability.
5.3 Common Misconceptions in Selection
Misconception 1: Higher hydrogen content means faster curing. Correct answer: Curing speed mainly depends on the concentration and activity of the platinum catalyst; the hydrogen content has a secondary effect. Excessive hydrogen content can actually lead to uneven curing due to localized over-crosslinking.
Misconception 2: Low-viscosity hydrogen-containing silicone oil is always easier to mix.
Correct answer: While low viscosity is indeed easier to mix, it has higher volatility and is prone to "migrating" within the system, potentially leading to stratification and uneven performance after long-term storage.
Misconception 3: End-containing hydrogen-containing silicone oil performs worse than side-containing hydrogen-containing silicone oil.
Correct answer: The two are suitable for different applications. End-containing hydrogen-containing silicone oil often outperforms side-containing hydrogen-containing silicone oil in terms of transparency and flexibility, making it the preferred choice for optical and flexible applications.
Misconception 4: Hydrogen-containing silicone oil can be stored openly for extended periods.
Correct answer: Si-H bonds are sensitive to moisture and oxygen. Long-term exposure to air will cause slow hydrolysis and oxidation, leading to a decrease in hydrogen content, viscosity changes, and the generation of hydrogen bubbles. It must be stored in a sealed, light-proof, and dry environment.
5.4 Technical Recommendations from DeepSea Technology
Based on the above analysis, Shanghai Silicon Power Materials Co., Ltd. recommends the following:
• First, define performance targets, then select hydrogen-containing silicone oils: Prioritize hardness, elongation, transparency, and temperature resistance before making a selection.
• Start with small-scale testing: Theoretical calculations should provide an initial formulation. Determine the optimal parameters through small-scale testing (at least 3 hydrogen content gradients are recommended).
• Pay attention to storage stability: Select low-volatile, high-purity hydrogen-containing silicone oils to avoid batch-to-batch performance fluctuations.
• Consider Si-H/Si-Vi in pairs: Do not select hydrogen-containing silicone oils in isolation; they must be designed in conjunction with vinyl silicone oils.
• Summer formulations require additional validation: Changes in reactivity at high temperatures may cause formulations that passed winter validation to experience excessively short operating periods or abnormal curing in summer.
Six. Conclusion Choosing a hydrogen-containing silicone oil is an "art of trade-offs."
• Hardness or flexibility? → Adjust hydrogen content
• Strength or elongation? → Adjust molecular weight
• Transparency or temperature resistance? → Adjust structure type
• Fast curing or long operating time? → Adjust catalyst and inhibitor. There is no "best" hydrogen-containing silicone oil, only the "most suitable" one.
Understanding the intrinsic relationship between structure, parameters, and performance is crucial for confident formulation design, rather than relying on trial and error to arrive at a result.
About Deepsea Technology:
Jiujiang Deepsea Technology Development Co., Ltd. has been deeply involved in the field of specialty organosilicon chemicals for many years, providing a full range of hydrogen-containing silicone oil products (end-containing, side-containing, end-side-containing, viscosity 20~10000 mPa·s, hydrogen content 0.05~1.6 wt%), and can provide customized formulation suggestions according to customers' specific applications.

