Jiujiang Deep Sea Technology Development Co., Ltd.

Silicon Oil As Damping Effect And Research Discussion

Mar 16, 2023

20230316160316

The damping performance of silicone oil based damping fluid is stable in a wide range of temperature and frequency, which requires silicone oil to have a small viscosity-temperature coefficient. In order to further improve the damping performance of silicone oil, it is often necessary to add a certain amount of filler to increase viscosity. The filler added requires long-term retention of non sedimentation in silicone oil, and requires that the viscosity of the damping fluid change slightly within a certain range of shear rates.

20230316160304
With the increase of temperature, the viscosity change coefficient of methyl silicone oil with high viscosity increases with the increase of viscosity. In addition, with the increase of temperature, the viscosity of methyl silicone oil changes greatly in the low temperature range, while it changes less and less in the high temperature range. Therefore, methyl silicone oil is a damping material suitable for use at higher temperatures. The effect of molar mass and distribution of methyl silicone oil on its viscosity-temperature properties. The viscosity-temperature coefficient of methyl silicone oil does not necessarily increase with the increase of viscosity. When the viscosity-temperature coefficient of methyl silicone oil is the same, the distribution of molar mass of high viscosity silicone oil will be wide. It is contradictory that the viscosity-temperature coefficient of methyl silicone oil increases with the increase of molar mass, but in fact, because the molar mass of general methyl silicone oil has a certain distribution and is polydispersity, which indicates that the viscosity-temperature coefficient is also related to the distribution of molar mass, but the relationship between the viscosity-temperature coefficient and the distribution of molar mass needs further study. Therefore, methyl silicone oil with different viscosity can be used to prepare the required viscosity methyl silicone oil with low viscosity-temperature coefficient as the base oil of damping fluid according to different proportions.

20230316160254


In order to further improve the damping performance of damping fluid, it is necessary to add a certain amount of tackifying filler to methyl silicone oil. Common fillers include calcium carbonate, diatomite, silica and polymethylsilsesquioxane powder. As for the effect of non-silicon series fillers on the viscosity of damping fluid, the effect of ultra-fine calcium carbonate on the viscosity of methyl silicone oil is the best, which is closely related to the large specific surface area of ultra-fine calcium carbonate. However, even if ultra-fine calcium carbonate is used as the tackifier, when it is placed for more than 60 days, methyl silicone oil will still precipitate and delaminate, so these fillers are not the most suitable for silicone oil tackifier.
The influence of silica filler on the damping fluid performance. The damping property of damping fluid should be stable under different shear rates, which requires that the viscosity of damping fluid change little within a certain range of shear rates. The effect of rotor speed on the dynamic viscosity of damping fluid containing different silica and methyl silicone oil 1 as the base material.

20230316160234


Conclusion: Methyl silicone oil with low viscosity-temperature coefficient can be prepared by using methyl silicone oil with different viscosity, and damping fluid with stable damping performance at a certain range of shear rate can be prepared by adding polymethylsilsesquioxane powder.

goTop