Silicone weather-resistant sealant is a kind of paste mixed with α, omega-dihydroxydimethicone as the main raw material, nano calcium carbonate or fumed silica as filler, and plasticizer, coupling agent and catalyst as auxiliary materials.
At room temperature, it solidifies by reacting with moisture in the air to form an elastic sealant that acts on all aspects of life.
Key features
Strong adhesion, excellent tensile strength and high displacement capacity;
At the same time, it has weather resistance, earthquake resistance, moisture resistance, aging resistance, and ozone resistance, and can adapt to the changes of high and low temperatures within a certain range;
Curing method
Depending on the curing method, the sealant is divided into one-component and two-component. One-component silicone adhesive does not need to add additional curing agent or catalyst, and can directly react with moisture and moisture in the air for self-curing.
The two-component silicone adhesive is composed of two components, AB, (conventional) group A is silicone glue, and group B is the curing agent. (Volume ratio) according to the ratio of 10:1, the two components are mixed together to cure and bond the article.

Crosslinkers are divided
Silicone sealants are classified into several common categories according to different crosslinkers: deacidification, alcoholization, and oxime (WO).
The deacidification type is often referred to as acid glue, which has the strongest adhesion and is widely used in bonding fish tanks. However, deacid-free sealant is not suitable for alkaline substances such as metal, stone, concrete, etc., which will cause the failure of bonding and has a certain corrosiveness to metal.
The dealcoholized type of glue is the least corrosive to the material and is often used for internal gluing, such as oil sand glass. The oxime type of glue has good physical properties and stable storage performance, but it has an impact on copper-based materials, and will react with copper, polycarbonate and other materials, causing the failure of bonding performance.
Product Use:
1. Sealing of non-structural interfaces of various glass curtain walls; 2. Sealing of joints of metal (aluminum plate), aluminum-plastic panel and stone curtain wall; 3. Other occasions with high requirements for sealing safety; 4. Installation of various doors and windows with joint filling and bonding sealing; 5. All kinds of interior decoration caulking and sealing, 6. Indoor edge sealing joints, 7. Other general building caulking and bonding sealing, 8. Other non-structural assembly caulking sealing.
Construction matters
1. Before use, the relevant substrate must be tested for compatibility and adhesion; 2. The construction site must maintain a good ventilation environment; 3. The user should strictly abide by the construction specifications during the construction process;
4. The uncured glue should not be in contact with the skin for a long time; 5. If it accidentally gets into the eyes, wash it with a large amount of water, and seek medical attention in case of emergency; 6. All products are strictly forbidden to be eaten and avoid contact with children.
